5568 is similar to 5567, but is slightly darker with a larger element of the dark grains. The result varies depending on the thickness and firning conditions. To be applied relatively thick. The colour development is best in the firing range 1170-1200 °C.

The glaze powder is mixed with water, for good mixing results we recommend glaze stirrers [325031]. Measure approx. 8 dl water per kg glaze powder and slowly pour the powder into the water while stirring. Adjust glaze powder and amount of water using a hydrometer [324060]. If the glaze has not been used for some time, the specific gravity should be checked before use.

We recommend that transparent and single-colored glazes should be sieved through a sieve with a mesh density of 60 mesh [32522060], however, sieving of effect glazes should be avoided.

The glaze can settle, to avoid this adjusting agent ABM-3 [2858] can be added.