Stoneware Glaze 1373 Copper Green, Satin 5 kg
[231373-5]

A glaze that gives very varying results depending on the thickness of the glaze layer and the firing temperature. The best results are achieved on light, iron-free clays where the glaze becomes light medium green with a slight crystal formation in the surface. On gray clay, the glaze becomes darker green and duller. The glaze is not suitable for dark brown clay types.

The glaze powder is mixed with water, for good mixing results we recommend glaze stirrers [325031]. Measure approx. 8 dl water per kg glaze powder and slowly pour the powder into the water while stirring. Adjust glaze powder and amount of water using a hydrometer [324060]. If the glaze has not been used for some time, the specific gravity should be checked before use.

We recommend that transparent and single-colored glazes should be sieved through a sieve with a mesh density of 60 mesh [32522060], however, sieving of effect glazes should be avoided.

The glaze can settle, to avoid this adjusting agent ABM-3 [2858] can be added.