Earthenware Glaze 3006 Grey with spots 2 kg
[223006-2]

The glaze is creamy white with fine iron dots. Suitable for double glazing over or under another glaze. Make sure that the layer does not get thicker than normal and test burn for unexpected drains. When firing to max. At 1220 °C, the dots melt out and give a reddish-brown colour.

The glaze powder is mixed with water, for good mixing results we recommend glaze stirrers [325031]. Measure approx. 8 dl water per kg glaze powder and slowly pour the powder into the water while stirring. Adjust glaze powder and amount of water using a hydrometer [324060]. If the glaze has not been used for some time, the specific gravity should be checked before use.

We recommend that transparent and single-colored glazes should be sieved through a sieve with a mesh density of 60 mesh [32522060], however, sieving of effect glazes should be avoided.

The glaze can settle, to avoid this adjusting agent ABM-3 [2858] can be added.